{"DocTree_ID":"K896pP5opSo%3d","DocTree_BodyText":"

Part 2 - Zones and Sub Zones

\u00A0

Community Facilities Zone

\n
\u00A0

Assessment Provisions (AP)

\n
\u00A0

Desired Outcome (DO)

\u00A0
Desired Outcome
DO 1

Provision of a range of community, educational, recreational and health care facilities.

\u00A0

Performance Outcomes (PO) and Deemed-to-Satisfy (DTS) Criteria / Designated Performance Feature (DPF)

\n
\u00A0
Performance OutcomeDeemed-to-Satisfy Criteria / Designated Performance Feature
Land Use and Intensity
PO 1.1

Development is associated with or ancillary to the provision of community, educational, recreational and / or health care services.

\n
DTS/DPF 1.1

Development comprises one or more of the following:

  1. Cemetery
  2. Child care facility
  3. Community facility
  4. Consulting room
  5. Educational facility
  6. Emergency services facility
  7. Health care facility
  8. Hospital
  9. Indoor recreation facility
  10. Library
  11. Office associated with community service
  12. Place of worship
  13. Recreation area
  14. Shop
PO 1.2

Shops including restaurants are of a scale that is subordinate to the principal community use of land.

\n
DTS/DPF 1.2

Shop gross leasable floor area does not exceed 250m2.

\n
PO 1.3

Offices are of a scale that is subordinate to the principal community use of land.

\n
DTS/DPF 1.3

Office gross leasable floor area does not exceed 250m2.

\n
PO 1.4

Integration and coordination of land uses to enhance the accessibility and efficiency of service delivery.

DTS/DPF 1.4

None are applicable.

\n
PO 1.5

Development avoids inhibiting or prejudicing future delivery of community, educational, recreational or health care services.

\n
DTS/DPF 1.5

None are applicable.

\n
PO 1.6

Community facilities are designed to encourage flexible and adaptable use of open space and facilities for a range of uses over time.

DTS/DPF 1.6

None are applicable.

PO 1.7

Expansion of existing community services such as educational facilities, community facilities and child care facilities in a manner which complements the scale of development envisaged by the desired outcome for the neighbourhood.

DTS/DPF 1.7

Alteration of or addition to existing educational facilities, community facilities or child care facilities where all the following are satisfied:

  1. set back at least 3m from any boundary shared with a residential land use
  2. building height not exceeding 1 building level
  3. the total floor area of the building not exceeding 150% of the total floor area prior to the addition/alteration
  4. development satisfies Transport, Access and Parking Table 1 - General Off-Street Car Parking Requirements or Table 2 - Off-Street Car Parking Requirements in Designated Areas to the nearest whole number.

\u00A0

Building Height and Setbacks
PO 2.1

Building height is consistent with the maximum height expressed in any relevant Maximum Building Height (Levels) Technical and Numeric Variation layer and the Maximum Building Height (Metres) Technical and Numeric Variation layer\u00A0or is generally consistent with the prevailing character of the locality and height of nearby buildings.

DTS/DPF 2.1

Other than on a Catalyst site in the St Andrews Hospital Precinct Subzone, development does not exceed the following building height(s):

Maximum Building Height (Levels)
Maximum building height is 1 level
Maximum building height is 2 levels
Maximum building height is 3 levels
Maximum building height is 4 levels
Maximum building height is 5 levels
Maximum building height is 6 levels
Maximum building height is 14 levels
Maximum Building Height (Metres)
Maximum building height is 4.5m
Maximum building height is 8.2m
Maximum building height is 9m
Maximum building height is 10m
Maximum building height is 11.5m
Maximum building height is 12m
Maximum building height is 12.5m
Maximum building height is 15m
Maximum building height is 18m
Maximum building height is 18.5m
Maximum building height is 43m

In relation to DTS/DPF 2.1, in instances where:

  1. more than one value is returned in the same field, refer to the Maximum Building Height (Levels) Technical and Numeric Variation layer or Maximum Building Height (Metres) Technical and Numeric Variation layer in the SA planning database to determine the applicable value relevant to the site of the proposed development
  2. only one value is returned (i.e. there is one blank field), then the relevant height in metres or building levels applies with no criteria for the other
  3. no value is returned (i.e. there are blank fields for both maximum building height (metres) and maximum building height (levels), then none are applicable and the relevant development cannot be classified as deemed-to-satisfy.
PO 2.2

Buildings mitigate the visual impacts of massing on residential development within a neighbourhood-type zone.

DTS/DPF 2.2

Except in the St Andrews Hospital Precinct Subzone and the part of the WHC and Memorial Hospital Precinct Subzone north of Kermode Street, buildings constructed within a building envelope provided by a 45 degree plane measured from a height of 3m above natural ground level at the boundary of an allotment used for residential purposes within a neighbourhood-type zone as shown in the following diagram (except where this boundary is a southern boundary or where this boundary is the street boundary):

PO 2.3

Buildings mitigate overshadowing of residential development within a neighbourhood-type zone.

DTS/DPF 2.3

Buildings on sites with a southern boundary adjoining the an allotment boundary used for residential purposes within a neighbourhood-type zone are constructed within a building envelope provided by a 30 degree plane grading north measured from a height of 3m above natural ground level at the southern boundary, as shown in the following diagram\u00A0(except where this boundary is a street boundary):

\u00A0
PO 2.4

Buildings are set back from all boundaries (other than street boundaries) to minimise impacts on neighbouring residential properties, including access to natural light and ventilation

DTS/DPF 2.4

Buildings are set back a minimum 3m from all boundaries where the subject land abuts an allotment used for residential purposes, except where the development abuts the wall of an existing or simultaneously constructed building on the adjoining land.

PO 2.5
Buildings on an allotment fronting a road that is not a State Maintained Road, and where land on the opposite side of the road is within a neighbourhood-type zone, provides an orderly transition to the built form scale envisaged in the adjacent zone to complement the streetscape character.\n
DTS/DPF 2.5
None are applicable.\u00A0\n
Advertisements
PO 3.1

Freestanding advertisements that identify the associated business without creating a visually dominant element within the locality.

DTS/DPF 3.1

Freestanding advertisements satisfy all of the following:

  1. do not exceed 2m in height
  2. do not have a sign face that exceeds 2m2 per side.
Concept Plans
PO 4.1
Development is compatible with the outcomes sought by any relevant Concept Plan contained within Part 12 - Concept Plans of the Planning and Design Code to support the orderly development of land\u00A0through staging of development and provision of infrastructure.
DTS/DPF 4.1
The site of the development is wholly located outside any relevant Concept Plan boundary. The following Concept Plans are relevant:\n
Description
Concept Plan 75 - Warrengie Development Area Land Form / Building Module Cross Section - Warrengie
Concept Plan 3 - Mount Barker and Littlehampton
Concept Plan 71 - Hamley Bridge
Concept Plan 81 - Edinburgh Defence Airfield Lighting Constraints
Concept Plan 90 - Residential - Gardner St, Littlehampton
Concept Plan 101 - Evanston Gardens, Evanston South, Hillier
Concept Plan 100 - Gawler East
Concept Plan 156 - Precinct 202
Concept Plan 178 - Adult Entertainment Premises and Adult Products and Services Premises

In relation to DTS/DPF 4.1, in instances where:

  1. one or more Concept Plan is returned, refer to Part 12 - Concept Plans in the Planning and Design Code to determine if a Concept Plan is relevant to the site of the proposed development. Note: multiple concept plans may be relevant.
  2. in instances where ‘no value’ is returned, there is no relevant concept plan and DTS/DPF 4.1 is met.
\u00A0
\u00A0

Table 1 - Accepted Development Classification

Unless otherwise specified in another class of development, the reference to a class of development includes a reference to a change in the use of the relevant land or building work (including construction of a new building, or alteration/addition of an existing building).
\u00A0
The following table identifies Classes of Development that are classified as Accepted Development subject to meeting the Accepted Development Classification Criteria

Class of DevelopmentAccepted Development Classification Criteria
Brush fence
Except where any of the following apply:
  • Hazards (Flooding) Overlay
  • Historic Area Overlay
  • Local Heritage Place Overlay
  • Ramsar Wetlands Overlay
  • State Heritage Area Overlay
  • State Heritage Place Overlay
    \n
  1. The fence is formed (wholly or partially) from brush
    2. \n
  2. The fence does not exceed 2.1m in height (measured from the lower of the 2 adjoining finished ground levels)
    3. \n
  3. The fence does not exceed 1m in height within 6m of the intersection of 2 boundaries of land where those boundaries both face a road, other than where a 4 x 4 m corner cut-off has already been provided (and is to be preserved)
    4. \n
  4. The development will not be located within the extents of the River Murray 1956 Flood Level as delineated by the SA Property and Planning Atlas.
    5. \n
\n
Building alterations
Except where any of the following apply:
  • Local Heritage Place Overlay
  • State Heritage Area Overlay
  • State Heritage Place Overlay
    \n
  1. The alteration does not:\n
      \n
    1. increase the floor area of the building
      2. \n
    2. exceed the existing wall height
      3. \n
    3. exceed the existing overall building height
      4. \n
    4. alter the roof profile
      5. \n
    5. alter an approved privacy screening arrangement or window treatment
      6. \n
    6. result in less on-site car parking than specified in Transport, Access and Parking Table 1 - General Off-Street Car Parking Requirements or Table 2 - Off-Street Car Parking Requirements in Designated Areas.
      7. \n
    \n
    2. \n
  2. Where located within the Historic Area Overlay, there will be no external alterations to the external appearance of the building where visible from the public realm.
    3. \n
\n
Building work on railway land\u00A0
Except where any of the following apply:
  • Coastal Areas Overlay
  • Hazards (Acid Sulfate Soils) Overlay
  • Local Heritage Place Overlay
  • Significant Landscape Protection Overlay
  • State Heritage Area Overlay
  • State Heritage Place Overlay
    \n
  1. Building work is associated with a railway
    2. \n
  2. It is situated (or to be situated) on railway land (within the meaning of Schedule 4 clause 14 of the Planning, Development and Infrastructure (General) Regulations 2017)
    3. \n
  3. It is required for the conduct or maintenance of railway activities
    4. \n
  4. It does not involve the clearance of native vegetation
    5. \n
  5. The development will not be located within the extents of the River Murray 1956 Flood Level as delineated by the SA Property and Planning Atlas.
    6. \n
\n
Educational facility
Except where any of the following apply:
  • Hazards (Bushfire - High Risk) Overlay
  • Hazards (Flooding) Overlay
  • Historic Area Overlay
  • Local Heritage Place Overlay
  • State Heritage Area Overlay
  • State Heritage Place Overlay
    \n
  1. Development comprises the construction, alteration of, or addition to, a classroom or other covered outdoor educational area within the area of an existing educational facility.
    2. \n
  2. The building does not exceed 1 building level.
    3. \n
  3. The building is setback at least 3m from any boundary.
    4. \n
  4. The floor area of the building does not exceed 200m2.
    5. \n
  5. The building will not result in fewer vehicular parks on the site and off-street vehicular parking exists in accordance with the rate(s) specified in Transport, Access and Parking Table 1 - General Off-Street Car Parking Requirements or Table 2 - Off-Street Car Parking Requirements in Designated Areas to the nearest whole number.
    6. \n
\n
Partial demolition of a building or structure
Except where any of the following apply:
  • Historic Area Overlay
  • Local Heritage Place Overlay
  • State Heritage Area Overlay
  • State Heritage Place Overlay
None\n
Private bushfire shelter
Except where any of the following apply:
  • Coastal Areas Overlay
  • Future Local Road Widening Overlay
  • Future Road Widening Overlay
  • Hazards (Acid Sulfate Soils) Overlay
  • Hazards (Flooding) Overlay
  • Local Heritage Place Overlay
  • River Murray Flood Plain Protection Area Overlay
  • Significant Landscape Protection Overlay
  • State Heritage Area Overlay
  • State Heritage Place Overlay
    \n
  1. The development will not be contrary to the regulations prescribed for the purposes of section 86 of the Electricity Act 1996
    2. \n
  2. The development will not be built, or encroach, on an area that is, or will be, required for a sewerage system or waste control system
    3. \n
  3. Primary street setback - at least as far back as the building to which it is ancillary
    4. \n
  4. Secondary street setback - at least 900mm from the boundary of the allotment
    5. \n
  5. At least 6m from the corner of an allotment which abuts the intersection of two or more roads (other than where a 4m x 4m allotment cut-off is already in place)
    6. \n
  6. Does not involve the clearance of native vegetation.
    7. \n
\n
Protective tree netting structure
Except where any of the following apply:
  • Hazards (Flooding) Overlay
  • Historic Area Overlay
  • Local Heritage Place Overlay
  • Ramsar Wetlands Overlay
  • Significant Landscape Protection Overlay
  • State Heritage Area Overlay
  • State Heritage Place Overlay
    \n
  1. The development will not be contrary to the regulations prescribed for the purposes of section 86 of the Electricity Act 1996
    2. \n
  2. The development will not be located within the extents of the River Murray 1956 Flood Level as delineated by the SA Property and Planning Atlas
    3. \n
  3. The development will not be built, or encroach, on an area that is, or will be, required for a sewerage system or waste control system
    4. \n
  4. No part of the protective tree netting structure will be more than 6m above natural ground level (depending on where it is situated)
    5. \n
  5. Netting visible from the outside of the protective tree netting structure is of a low light-reflective nature, and, in the case of a structure that has side netting, the side netting is of a dark colour
    6. \n
  6. In the case of a development on a site that is within a Hazards (Bushfire - Outback) Overlay, Hazards (Bushfire - Regional) Overlay, Hazards (Bushfire - General Risk) Overlay, Hazards (Bushfire Medium - Risk) Overlay or Hazards (Bushfire - High Risk) Overlay, the protective tree netting structure provides for access to the site in accordance with the following:\n
      \n
    1. no part of the protective tree netting structure (including cables and points of attachment of cables (known as 'auger' or 'anchor' points) will be within 5m of any boundary of the site; or
      2. \n
    2. does not prevent access or movement of vehicles of 4m height and 3.5m width (or less) on any access road or track (including fire tracks) on the site
      3. \n
    \n
    7. \n
  7. No part of the netting canopy of the protective tree netting structure:\n
      \n
    1. will cover native vegetation; or
      2. \n
    2. will be within 5m of a road (including any road reserve)
      3. \n
    \n
    8. \n
  8. The points of attachment of any cables will not be located:\n
      \n
    1. outside the boundaries of the site; or
      2. \n
    2. within a watercourse (within the meaning of the Landscape South Australia Act 2019)
      3. \n
    \n
    9. \n
  9. In relation to a dwelling located on an allotment adjoining the site on which the protective tree netting structure is located, the protective tree netting structure complies with the following:\n
      \n
    1. if the netting canopy nearest the dwelling on the adjoining allotment is 4m or less above ground level (depending on where it is situated), no part of the netting canopy is within 10m of the dwelling
      2. \n
    2. in any other case, no part of the netting canopy is within 15m of the dwelling.
      3. \n
    \n
    10. \n
\n
Shade sail
Except where any of the following apply:
  • Future Local Road Widening Overlay
  • Future Road Widening Overlay
  • Historic Area Overlay
  • Local Heritage Place Overlay
  • State Heritage Area Overlay
  • State Heritage Place Overlay
    \n
  1. The development will not be contrary to the regulations prescribed for the purposes of section 86 of the Electricity Act 1996
    2. \n
  2. The development will not be built, or encroach, on an area that is, or will be, required for a sewerage system or waste control system
    3. \n
  3. Shade sail consists of permeable material
    4. \n
  4. The total area of the sail - does not exceed 40m2
    5. \n
  5. No part of the shade sail will be:\n
      \n
    1. 3m above ground or floor level (depending on where it is situated) at any place within 900mm of a boundary of the allotment
      2. \n
    2. 5m above ground or floor level (depending on where it is situated) within any other part of the allotment
      3. \n
    \n
    6. \n
  6. Primary street setback - at least as far back as the building line of the building to which it is ancillary
    7. \n
  7. If any part of the sail will be situated on a boundary of the allotment, the length of sail along a boundary does not exceed 11m
    8. \n
  8. In a case where any part of the sail or a supporting structure will be situated on a side boundary of the allotment - the length of the sail and any such supporting structure together with all relevant walls or structures located along the boundary will not exceed 45% of the length of the boundary
    9. \n
  9. Does not involve the clearance of native vegetation
    10. \n
  10. The development will not be located within the extents of the River Murray 1956 Flood Level as delineated by the SA Property and Planning Atlas.
    11. \n
\n
Solar photovoltaic panels (roof mounted)
Except where any of the following apply:
  • Local Heritage Place Overlay
  • State Heritage Area Overlay
  • State Heritage Place Overlay
    \n
  1. The development will not be contrary to the regulations prescribed for the purposes of section 86 of the Electricity Act 1996
    2. \n
  2. Panels are installed parallel to the roof of a building and with the underside surface of the panel not being more than 100mm above the surface of the roof
    3. \n
  3. Panels and associated components do not overhang any part of the roof
    4. \n
  4. Does not apply to system with a generating capacity of more than 5MW that is to be connected to the State's power system
    5. \n
  5. If the building is in a Historic Area Overlay-no part of the system, when installed, will be able to be seen by a person standing at ground level in a public street.
    6. \n
\n
Swimming pool or spa pool and associated swimming pool safety features
Except where any of the following apply:
  • Future Local Road Widening Overlay
  • Future Road Widening Overlay
  • Hazards (Flooding) Overlay
  • Local Heritage Place Overlay
  • State Heritage Area Overlay
  • State Heritage Place Overlay
    \n
  1. The development will not be contrary to the regulations prescribed for the purposes of section 86 of the Electricity Act 1996.
    2. \n
  2. The development will not be built, or encroach, on an area that is, or will be, required for a sewerage system or waste control system
    3. \n
  3. It is ancillary to a dwelling erected on the site or a dwelling to be erected on the site in accordance with a development authorisation which has been granted
    4. \n
  4. Allotment boundary setback - not less than 1m
    5. \n
  5. Primary street setback - at least as far back as the building line of the building to which it is ancillary
    6. \n
  6. Location of pumps and/or filtration systems from a dwelling on an adjoining allotment:\n
      \n
    1. not less than 5m where the filtration system is located inside a solid acoustic structure; or
      2. \n
    2. not less than 12m in any other case
      3. \n
    \n
    7. \n
  7. Does not involve the clearance of native vegetation
    8. \n
  8. The development will not be located within the extents of the River Murray 1956 Flood Level as delineated by the SA Property and Planning Atlas.
    9. \n
\n
Water tank (above ground)
Except where any of the following apply:
  • Historic Area Overlay
  • Local Heritage Place Overlay
  • Ramsar Wetlands Overlay
  • State Heritage Area Overlay
  • State Heritage Place Overlay
    \n
  1. The development will not be contrary to the regulations prescribed for the purposes of section 86 of the Electricity Act 1996
    2. \n
  2. The development will not be built, or encroach, on an area that is, or will be, required for a sewerage system or waste control system
    3. \n
  3. The tank is part of a roof drainage system
    4. \n
  4. Total floor area - not exceeding 15m2 
    5. \n
  5. The tank is located wholly above ground
    6. \n
  6. Tank height - does not exceed 4m above natural ground level
    7. \n
  7. Primary street setback - at least as far back as the building line of the building to which it is ancillary
    8. \n
  8. In the case of a tank made of metal - the tank is pre-colour treated or painted in a non-reflective colour
    9. \n
  9. Does not involve the clearance of native vegetation.
    10. \n
\n
Water tank (underground)
Except where any of the following apply:
  • Coastal Areas Overlay
  • Hazards (Acid Sulfate Soils) Overlay
  • Ramsar Wetlands Overlay
    \n
  1. The development will not be built, or encroach, on an area that is, or will be, required for a sewerage system or waste control system
    2. \n
  2. The tank (including any associated pump) is located wholly below the level of the ground
    3. \n
  3. Does not involve the clearance of native vegetation.
    4. \n
\n

\n
\u00A0

Table 2 - Deemed-to-Satisfy Development Classification

Unless otherwise specified in another class of development, the reference to a class of development includes a reference to a change in the use of the relevant land or building work (including construction of a new building, or alteration/addition of an existing building).
\u00A0
The following table identifies Classes of Development that are classified as Deemed-to-Satisfy Development subject to meeting the ‘Deemed-to-Satisfy Development Classification Criteria’. Provisions referred to in the table are Deemed-to-Satisfy Criteria. Where a development comprises more than one Class of Development the relevant criteria will be taken to be the sum of the criteria for each Class of Development.

Class of DevelopmentDeemed-to-Satisfy Development Classification Criteria
ZoneGeneral Development PoliciesSubzone
(applies only in the area affected by the Subzone)		Overlay
(applies only in the area affected by the Overlay)
Advertisement
Except where any of the following apply:
  • Character Preservation District Overlay
  • Heritage Adjacency Overlay
  • Historic Area Overlay
  • Local Heritage Place Overlay
  • Non-stop Corridor Overlay
  • Significant Landscape Protection Overlay
  • State Heritage Area Overlay
  • State Heritage Place Overlay
 NoneAdvertisements [Appearance]
DTS/DPF 1.1, DTS/DPF 1.2, DTS/DPF 1.3, DTS/DPF 1.4

Advertisements [Proliferation of Advertisements]
DTS/DPF 2.3

Advertisements [Advertising Content]
DTS/DPF 3.1

Advertisements [Amenity Impacts]
DTS/DPF 4.1

Advertisements [Safety]
DTS/DPF 5.1, DTS/DPF 5.2, DTS/DPF 5.3, DTS/DPF 5.4, DTS/DPF 5.5, DTS/DPF 5.6

Clearance from Overhead Powerlines
DTS/DPF 1.1

Infrastructure and Renewable Energy Facilities [Wastewater Services]
DTS/DPF 12.2		 NoneAdvertising Near Signalised Intersections Overlay [Advertisements Near Signalised Intersections]
DTS/DPF 1.1

Airport Building Heights (Aircraft Landing Areas) Overlay [Built Form]
DTS/DPF 1.1

Airport Building Heights (Regulated) Overlay [Built Form]
DTS/DPF 1.1

Building Near Airfields Overlay
DTS/DPF 1.3

Defence Aviation Area Overlay [Built Form]
DTS/DPF 1.1

Future Road Widening Overlay [Future Road Widening]
DTS/DPF 1.1

Gateway Overlay [Advertisements]
DTS/DPF 4.1

Native Vegetation Overlay [Environmental Protection]
DTS/DPF 1.1

State Significant Native Vegetation Areas Overlay [Environmental Protection]
DTS/DPF 1.1
Replacement building
Except where any of the following apply:
  • Coastal Areas Overlay
  • Coastal Flooding Overlay
  • Hazards (Bushfire - High Risk) Overlay
  • Hazards (Bushfire - Medium Risk) Overlay
  • Hazards (Flooding - General) Overlay
  • Hazards (Flooding) Overlay
  • Historic Area Overlay
  • Local Heritage Place Overlay
  • River Murray Flood Plain Protection Area Overlay
  • State Heritage Area Overlay
  • State Heritage Place Overlay
 None None None None
Temporary accommodation in an area affected by bushfire \u00A0 None None None None
\u00A0

Table 3 - Applicable Policies for Performance Assessed Development

\u00A0\n
\u00A0
The following table identifies the policies that are applicable to the assessment of the identified Class of Development to the exclusion of all other policies within the Code. Policies referred to are Performance Outcome policies, and any associated Designated Performance Features. Relevant Desired Outcomes are not listed, but automatically apply in relation to a Performance Assessed Development. Where a development comprises more than one Class of Development the relevant policies will be taken to be the sum of the applicable policies for each Class of Development.

In the case of 'All Other Code Assessed Development', all policies from the zone subzone and overlays that have application to the spatial location of the development, and all general development policies, apply for the purpose of assessment.

Unless otherwise specified in another class of development, the reference to a class of development includes a reference to a change in the use of the relevant land or building work (including construction of a new building, or alteration/addition of an existing building).

Class of DevelopmentApplicable Policies
ZoneGeneral Development PoliciesSubzone
(applies only in the area affected by the Subzone)		Overlay
(applies only in the area affected by the Overlay)
Advertisement \u00A0Advertisements
PO 3.1		Advertisements [Appearance]
PO 1.1, PO 1.2, PO 1.3, PO 1.4, PO 1.5

Advertisements [Proliferation of Advertisements]
PO 2.1, PO 2.2, PO 2.3

Advertisements [Advertising Content]
PO 3.1

Advertisements [Amenity Impacts]
PO 4.1

Advertisements [Safety]
PO 5.1, PO 5.2, PO 5.3, PO 5.4, PO 5.5, PO 5.6

Clearance from Overhead Powerlines
PO 1.1

Infrastructure and Renewable Energy Facilities [Wastewater Services]
PO 12.2		 NoneAdvertising Near Signalised Intersections Overlay [Advertisements Near Signalised Intersections]
PO 1.1

Airport Building Heights (Aircraft Landing Areas) Overlay [Built Form]
PO 1.1

Airport Building Heights (Regulated) Overlay [Built Form]
PO 1.1

Building Near Airfields Overlay
PO 1.3

Character Area Overlay [All Development]
PO 1.1

Character Area Overlay [Built Form]
PO 2.1, PO 2.2, PO 2.5

Character Area Overlay [Ancillary Development]
PO 4.3

Character Area Overlay [Context and Streetscape Amenity]
PO 6.2

Character Preservation District Overlay [Built Form and Character]
PO 2.1, PO 2.2, PO 2.3

Character Preservation District Overlay [Built Form and Character in the Rural Area]
PO 3.1, PO 3.2, PO 3.3, PO 3.4, PO 3.5

Character Preservation District Overlay [Earthworks]
PO 4.1

Coastal Flooding Overlay
PO 1.1

Defence Aviation Area Overlay [Built Form]
PO 1.1

Future Local Road Widening Overlay [Future Road Widening]
PO 1.1

Future Road Widening Overlay [Future Road Widening]
PO 1.1

Gateway Overlay [Advertisements]
PO 4.1

Hazards (Flooding) Overlay [Flood Resilience]
PO 3.1, PO 3.2, PO 3.3

Hazards (Flooding) Overlay [Environmental Protection]
PO 4.2

Heritage Adjacency Overlay [Built Form]
PO 1.1

Historic Area Overlay [All Development]
PO 1.1

Historic Area Overlay [Built Form]
PO 2.1, PO 2.2, PO 2.3, PO 2.5

Historic Area Overlay [Ancillary development]
PO 4.3

Historic Area Overlay [Context and Streetscape Amenity]
PO 6.2

Historic Area Overlay [Ruins]
PO 8.1

Local Heritage Place Overlay [Built Form]
PO 1.1, PO 1.2, PO 1.3, PO 1.4, PO 1.5, PO 1.6, PO 1.7

Local Heritage Place Overlay [Alterations and Additions]
PO 2.1, PO 2.2

Local Heritage Place Overlay [Ancillary Development]
PO 3.3

Native Vegetation Overlay [Environmental Protection]
PO 1.1, PO 1.2, PO 1.4

Non-Stop Corridors Overlay [Non-Stop Corridor Overlay]
PO 1.1

Scenic Quality Overlay [Land Use and Intensity]
PO 1.1

Scenic Quality Overlay [Built Form and Character]
PO 2.1

Significant Landscape Protection Overlay [Land Use and Intensity]
PO 1.1

Significant Landscape Protection Overlay [Built Form and Character]
PO 2.1, PO 2.2

Significant Landscape Protection Overlay [Landscaping]
PO 3.1

Significant Landscape Protection Overlay [Earthworks]
PO 4.1

State Heritage Area Overlay [Built Form]
PO 1.1, PO 1.2, PO 1.3, PO 1.4, PO 1.5

State Heritage Area Overlay [Ancillary Development]
PO 3.3

State Heritage Area Overlay [Landscape Context and Streetscape Amenity]
PO 5.1

State Heritage Place Overlay [Built Form]
PO 1.1, PO 1.2, PO 1.3, PO 1.4, PO 1.5, PO 1.6

State Heritage Place Overlay [Ancillary Development]
PO 3.3

State Heritage Place Overlay [Landscape Context and Streetscape Amenity]
PO 5.1

State Significant Native Vegetation Areas Overlay [Environmental Protection]
PO 1.1
Consulting room \u00A0Land Use and Intensity
PO 1.1, PO 1.4, PO 1.5, PO 1.6

Building Height and Setbacks
PO 2.1, PO 2.2, PO 2.3, PO 2.4

Concept Plans
PO 4.1		Clearance from Overhead Powerlines
PO 1.1

Design in Urban Areas [All Development [External Appearance]]
PO 1.1, PO 1.2, PO 1.3, PO 1.4, PO 1.5

Design in Urban Areas [All Development [Safety]]
PO 2.1, PO 2.2, PO 2.3, PO 2.4, PO 2.5

Design in Urban Areas [All Development [Landscaping]]
PO 3.1

Design in Urban Areas [All Development [Environmental Performance]]
PO 4.1, PO 4.2, PO 4.3

Design in Urban Areas [All Development [On-site Waste Treatment Systems]]
PO 6.1

Design in Urban Areas [All Development [Car parking appearance]]
PO 7.1, PO 7.2, PO 7.3, PO 7.4, PO 7.5, PO 7.6, PO 7.7

Design in Urban Areas [All Development [Earthworks and sloping land]]
PO 8.1, PO 8.2, PO 8.3, PO 8.4, PO 8.5

Design in Urban Areas [All Development [Overlooking / Visual Privacy (low rise buildings)]]
PO 10.1, PO 10.2

Design in Urban Areas [All Development [Site Facilities / Waste Storage (excluding low rise residential development)]]
PO 11.1, PO 11.2, PO 11.3, PO 11.4, PO 11.5

Design in Urban Areas [All Development - Medium and High Rise [External Appearance]]
PO 12.1, PO 12.2, PO 12.3, PO 12.4, PO 12.5, PO 12.6, PO 12.7, PO 12.8

Design in Urban Areas [All Development - Medium and High Rise [Landscaping]]
PO 13.1, PO 13.2, PO 13.3, PO 13.4

Design in Urban Areas [All Development - Medium and High Rise [Environmental]]
PO 14.1, PO 14.2, PO 14.3

Design in Urban Areas [All Development - Medium and High Rise [Car Parking]]
PO 15.1, PO 15.2

Design in Urban Areas [All Development - Medium and High Rise [Overlooking/Visual Privacy]]
PO 16.1

Design in Urban Areas [All non-residential development [Water Sensitive Design]]
PO 42.1, PO 42.2, PO 42.3

Design in Urban Areas [All non-residential development [Wash-down and Waste Loading and Unloading]]
PO 43.1

Infrastructure and Renewable Energy Facilities [Wastewater Services]
PO 12.1, PO 12.2

Interface between Land Uses [Hours of Operation]
PO 2.1

Interface between Land Uses [Overshadowing]
PO 3.1, PO 3.2, PO 3.3

Interface between Land Uses [Activities Generating Noise or Vibration]
PO 4.1, PO 4.2, PO 4.5, PO 4.6

Interface between Land Uses [Air Quality]
PO 5.2

Interface between Land Uses [Light Spill]
PO 6.1

Interface between Land Uses [Solar Reflectivity / Glare]
PO 7.1

Out of Activity Centre Development
PO 1.1, PO 1.2

Site Contamination
PO 1.1

Transport, Access and Parking [Movement Systems]
PO 1.2, PO 1.4

Transport, Access and Parking [Sightlines]
PO 2.1, PO 2.2

Transport, Access and Parking [Vehicle Access]
PO 3.1, PO 3.2, PO 3.3, PO 3.4, PO 3.5, PO 3.6, PO 3.7, PO 3.8, PO 3.9

Transport, Access and Parking [Access for People with Disabilities]
PO 4.1

Transport, Access and Parking [Vehicle Parking Rates]
PO 5.1

Transport, Access and Parking [Vehicle Parking Areas]
PO 6.1, PO 6.2, PO 6.3, PO 6.4, PO 6.5, PO 6.6

Transport, Access and Parking [Undercroft and Below Ground Garaging and Parking of Vehicles]
PO 7.1

Transport, Access and Parking [Bicycle Parking in Designated Areas]
PO 9.1, PO 9.2, PO 9.3

Transport, Access and Parking [Corner Cut-Offs]
PO 10.1		St Andrews Hospital Precinct Subzone [Land Use and Intensity]
PO 1.1

St Andrews Hospital Precinct Subzone [Built Form and Character]
PO 2.1, PO 2.2, PO 2.3

St Andrews Hospital Precinct Subzone [Catalyst Sites]
PO 3.1, PO 3.2, PO 3.3, PO 3.4

St Andrews Hospital Precinct Subzone [Access]
PO 4.1, PO4.2

WCH and Memorial Hospital Precinct Subzone [Land Use and Intensity]
PO 1.1

WCH and Memorial Hospital Precinct Subzone [Built Form and Character]
PO 2.1, PO 2.2

Neighbourhood Subzone [Land Use and Intensity]
PO 1.1

Neighbourhood Subzone [Built Form and Character]
PO 2.1, PO 2.2, PO 2.3, PO 2.4

Neighbourhood Subzone [Landscaping]
PO 4.1		Airport Building Heights (Aircraft Landing Areas) Overlay [Built Form]
PO 1.1

Airport Building Heights (Regulated) Overlay [Built Form]
PO 1.1

Building Near Airfields Overlay
PO 1.1, PO 1.2, PO 1.3

Character Area Overlay [All Development]
PO 1.1

Character Area Overlay [Built Form]
PO 2.1, PO 2.2, PO 2.3, PO 2.4, PO 2.5

Character Area Overlay [Alterations and Additions]
PO 3.1

Character Area Overlay [Context and Streetscape Amenity]
PO 6.1, PO 6.2

Character Preservation District Overlay [Built Form and Character]
PO 2.1, PO 2.2, PO 2.3

Character Preservation District Overlay [Built Form and Character in the Rural Area]
PO 3.1, PO 3.2, PO 3.3, PO 3.4, PO 3.5, PO 3.6

Character Preservation District Overlay [Earthworks]
PO 4.1

Coastal Areas Overlay [Hazard Risk Minimisation]
PO 2.1, PO 2.2, PO 2.3, PO 2.4

Coastal Areas Overlay [Coast Protection Works]
PO 3.1, PO 3.2

Coastal Areas Overlay [Environment Protection]
PO 4.1, PO 4.2, PO 4.3, PO 4.4, PO 4.5, PO 4.6, PO 4.7

Coastal Areas Overlay [Access]
PO 5.1, PO 5.2, PO 5.4

Coastal Flooding Overlay
PO 1.1

Defence Aviation Area Overlay [Built Form]
PO 1.1, PO 1.2

Future Local Road Widening Overlay [Future Road Widening]
PO 1.1

Future Road Widening Overlay [Future Road Widening]
PO 1.1

Gas and Liquid Petroleum Pipelines Overlay [Land Use and Intensity]
PO 1.1

Gas and Liquid Petroleum Pipelines (Facilities) Overlay [Safety]
PO 1.1

Gateway Overlay [Built Form and Character]
PO 1.1, PO 1.2, PO 1.3

Gateway Overlay [Landscaping]
PO 3.1, PO 3.2, PO 3.3, PO 3.4

Hazards (Acid Sulfate Soils) Overlay [Land Use and Intensity]
PO 1.1

Hazards (Bushfire - General Risk) Overlay [Siting]
PO 1.1

Hazards (Bushfire - General Risk) Overlay [Built Form]
PO 2.1, PO 2.2

Hazards (Bushfire - General Risk) Overlay [Vehicle Access – Roads, Driveways and Fire Tracks]
PO 5.1, PO 5.2, PO 5.3

Hazards (Bushfire - High Risk) Overlay [Land Use]
PO 1.1

Hazards (Bushfire - High Risk) Overlay [Siting]
PO 2.1

Hazards (Bushfire - High Risk) Overlay [Built Form]
PO 3.1, PO 3.2

Hazards (Bushfire - High Risk) Overlay [Vehicle Access –Roads, Driveways and Fire Tracks]
PO 6.1, PO 6.2, PO 6.3

Hazards (Bushfire - Medium Risk) Overlay [Siting]
PO 1.1

Hazards (Bushfire - Medium Risk) Overlay [Built Form]
PO 2.1, PO 2.2

Hazards (Bushfire - Medium Risk) Overlay [Vehicle Access - Roads, Driveways and Fire Tracks]
PO 5.1, PO 5.2, PO 5.3

Hazards (Bushfire - Outback) Overlay [Vehicle Access - Roads and Driveways]
PO 2.1, PO 2.2

Hazards (Bushfire - Regional) Overlay [Siting]
PO 1.1

Hazards (Bushfire - Regional) Overlay [Built Form]
PO 2.1, PO 2.2

Hazards (Bushfire - Regional) Overlay [Vehicle Access -Roads and Driveways]
PO 5.1, PO 5.2, PO 5.3

Hazards (Flooding) Overlay [Flood Resilience]
PO 3.1, PO 3.2, PO 3.3, PO 3.4, PO 3.5

Hazards (Flooding) Overlay [Environmental Protection]
PO 4.1, PO 4.2

Hazards (Flooding) Overlay [Site Earthworks]
PO 5.1, PO 5.2

Hazards (Flooding) Overlay [Access]
PO 6.1, PO 6.2

Hazards (Flooding – General) Overlay [Flood Resilience]
PO 2.1

Hazards (Flooding – General) Overlay [Environmental Protection]
PO 3.1

Hazards (Flooding - Evidence Required) Overlay [Flood Resilience]
PO 1.1

Heritage Adjacency Overlay [Built Form]
PO 1.1

Historic Area Overlay [All Development]
PO 1.1

Historic Area Overlay [Built Form]
PO 2.1, PO 2.2, PO 2.3, PO 2.4, PO 2.5

Historic Area Overlay [Context and Streetscape Amenity]
PO 6.1, PO 6.2

Historic Area Overlay [Ruins]
PO 8.1

Historic Shipwrecks Overlay [General]
PO 1.1

Interface Management Overlay [Land Use and Intensity]
PO 1.1

Key Outback and Rural Routes Overlay [Access - Safe Entry and Exit (Traffic Flow)]
PO 1.1

Key Outback and Rural Routes Overlay [Access - On-Site Queuing]
PO 2.1

Key Outback and Rural Routes Overlay [Access - Location (Spacing) - Existing Access Points]
PO 3.1

Key Outback and Rural Routes Overlay [Access - Location (Spacing) - New Access Points]
PO 4.1

Key Outback and Rural Routes Overlay [Access - Location (Sight Lines)]
PO 5.1

Key Outback and Rural Routes Overlay [Access - Mud and Debris]
PO 6.1

Key Outback and Rural Routes Overlay [Access - Stormwater]
PO 7.1

Key Outback and Rural Routes Overlay [Building on Road Reserve]
PO 8.1

Key Outback and Rural Routes Overlay [Public Road Junctions]
PO 9.1

Key Railway Crossings Overlay [Access, Design and Function]
PO 1.1

Local Heritage Place Overlay [Built Form]
PO 1.1, PO 1.2, PO 1.3, PO 1.4, PO 1.5, PO 1.6, PO 1.7

Local Heritage Place Overlay [Landscape Context and Streetscape Amenity]
PO 5.1

Local Heritage Place Overlay [Conservation Works]
PO 7.1

Major Urban Transport Routes Overlay [Access - Safe Entry and Exit (Traffic Flow)]
PO 1.1

Major Urban Transport Routes Overlay [Access - On-Site Queuing]
PO 2.1

Major Urban Transport Routes Overlay [Access – Location (Spacing) - Existing Access Points]
PO 3.1

Major Urban Transport Routes Overlay [Access – Location (Spacing) – New Access Points]
PO 4.1

Major Urban Transport Routes Overlay [Access - Location (Sight Lines)]
PO 5.1

Major Urban Transport Routes Overlay [Access - Mud and Debris]
PO 6.1

Major Urban Transport Routes Overlay [Access - Stormwater]
PO 7.1

Major Urban Transport Routes Overlay [Building on Road Reserve]
PO 8.1

Major Urban Transport Routes Overlay [Public Road Junctions]
PO 9.1

Major Urban Transport Routes Overlay [Corner Cut-Offs]
PO 10.1

Mount Lofty Ranges Water Supply Catchment (Area 1) Overlay [Water Quality]
PO 1.1

Mount Lofty Ranges Water Supply Catchment (Area 1) Overlay [Wastewater]
PO 2.1, PO 2.2, PO 2.3, PO 2.4

Mount Lofty Ranges Water Supply Catchment (Area 1) Overlay [Stormwater]
PO 3.1, PO 3.2, PO 3.3, PO 3.9

Mount Lofty Ranges Water Supply Catchment (Area 1) Overlay [Landscapes and Natural Features]
PO 4.1

Mount Lofty Ranges Water Supply Catchment (Area 2) Overlay [Water Quality]
PO 1.1

Mount Lofty Ranges Water Supply Catchment (Area 2) Overlay [Wastewater]
PO 2.1, PO 2.3, PO 2.4, PO 2.5

Mount Lofty Ranges Water Supply Catchment (Area 2) Overlay [Stormwater]
PO 3.1, PO 3.2, PO 3.3, PO 3.9

Mount Lofty Ranges Water Supply Catchment (Area 2) Overlay [Landscapes and Natural Features]
PO 4.1

Native Vegetation Overlay [Environmental Protection]
PO 1.1, PO 1.2, PO 1.4

Non-Stop Corridors Overlay [Non-Stop Corridor Overlay]
PO 1.1

Resource Extraction Protection Area Overlay [Protection of Strategic Resources]
PO 1.1

River Murray Flood Plain Protection Area Overlay [Wastewater]
PO 2.1

River Murray Flood Plain Protection Area Overlay [Built Form and Character]
PO 5.1, PO 5.3

River Murray Flood Plain Protection Area Overlay [Flood Resilience]
PO 6.1, PO 6.2

River Murray Flood Plain Protection Area Overlay [Environmental Protection]
PO 7.1, PO 7.2, PO 7.3

River Murray Flood Plain Protection Area Overlay [Access]
PO 8.1, PO 8.2, PO 8.3

Scenic Quality Overlay [Land Use and Intensity]
PO 1.1

Scenic Quality Overlay [Built Form and Character]
PO 2.1

Scenic Quality Overlay [Landscaping]
PO 3.1

Scenic Quality Overlay [Earthworks]
PO 4.1

Significant Interface Management Overlay [Land Use and Intensity]
PO 1.1

Significant Landscape Protection Overlay [Land Use and Intensity]
PO 1.1

Significant Landscape Protection Overlay [Built Form and Character]
PO 2.1, PO 2.2

Significant Landscape Protection Overlay [Landscaping]
PO 3.1

Significant Landscape Protection Overlay [Earthworks]
PO 4.1

State Heritage Area Overlay [Built Form]
PO 1.1, PO 1.2, PO 1.3, PO 1.4, PO 1.5

State Heritage Area Overlay [Landscape Context and Streetscape Amenity]
PO 5.1

State Heritage Area Overlay [Conservation Works]
PO 7.1

State Heritage Place Overlay [Built Form]
PO 1.1, PO 1.2, PO 1.3, PO 1.4, PO 1.5, PO 1.6, PO 1.7

State Heritage Place Overlay [Landscape Context and Streetscape Amenity]
PO 5.1

State Heritage Place Overlay [Conservation Works]
PO 7.1

State Significant Native Vegetation Areas Overlay [Environmental Protection]
PO 1.1

Traffic Generating Development Overlay [Traffic Generating Development]
PO 1.1, PO 1.2, PO 1.3

Urban Transport Routes Overlay [Access - Safe Entry and Exit (Traffic Flow)]
PO 1.1

Urban Transport Routes Overlay [Access - On-Site Queuing]
PO 2.1

Urban Transport Routes Overlay [Access - (Location Spacing) - Existing Access Point]
PO 3.1

Urban Transport Routes Overlay [Access – Location (Spacing) – New Access Points]
PO 4.1

Urban Transport Routes Overlay [Access - Location (Sight Lines)]
PO 5.1

Urban Transport Routes Overlay [Access – Mud and Debris]
PO 6.1

Urban Transport Routes Overlay [Access - Stormwater]
PO 7.1

Urban Transport Routes Overlay [Building on Road Reserve]
PO 8.1

Urban Transport Routes Overlay [Public Road Junctions]
PO 9.1

Urban Transport Routes Overlay [Corner Cut-Offs]
PO 10.1

Water Resources Overlay [Water Catchment]
PO 1.1, PO 1.2, PO 1.5, PO 1.6, PO 1.7, PO 1.8
Demolition \u00A0 None None NoneHistoric Area Overlay [All Development]
PO 1.1

Historic Area Overlay [Demolition]
PO 7.1, PO 7.2, PO 7.3

Historic Area Overlay [Ruins]
PO 8.1

Local Heritage Place Overlay [Landscape Context and Streetscape Amenity]
PO 5.1

Local Heritage Place Overlay [Demolition]
PO 6.1, PO 6.2

Local Heritage Place Overlay [Conservation Works]
PO 7.1

State Heritage Area Overlay [Landscape Context and Streetscape Amenity]
PO 5.1

State Heritage Area Overlay [Demolition]
PO 6.1

State Heritage Area Overlay [Conservation Works]
PO 7.1

State Heritage Place Overlay [Landscape Context and Streetscape Amenity]
PO 5.1

State Heritage Place Overlay [Demolition]
PO 6.1

State Heritage Place Overlay [Conservation Works]
PO 7.1
Office \u00A0Land Use and Intensity
PO 1.1, PO 1.3, PO 1.4, PO 1.5, PO 1.6

Building Height and Setbacks
PO 2.1, PO 2.2, PO 2.3, PO 2.4

Concept Plans
PO 4.1		Clearance from Overhead Powerlines
PO 1.1

Design in Urban Areas [All Development [External Appearance]]
PO 1.1, PO 1.2, PO 1.3, PO 1.4, PO 1.5

Design in Urban Areas [All Development [Safety]]
PO 2.1, PO 2.2, PO 2.3, PO 2.4, PO 2.5

Design in Urban Areas [All Development [Landscaping]]
PO 3.1

Design in Urban Areas [All Development [Environmental Performance]]
PO 4.1, PO 4.2, PO 4.3

Design in Urban Areas [All Development [On-site Waste Treatment Systems]]
PO 6.1

Design in Urban Areas [All Development [Car parking appearance]]
PO 7.1, PO 7.2, PO 7.3, PO 7.4, PO 7.5, PO 7.6, PO 7.7

Design in Urban Areas [All Development [Earthworks and sloping land]]
PO 8.1, PO 8.2, PO 8.3, PO 8.4, PO 8.5

Design in Urban Areas [All Development [Overlooking / Visual Privacy (low rise buildings)]]
PO 10.1, PO 10.2

Design in Urban Areas [All Development [Site Facilities / Waste Storage (excluding low rise residential development)]]
PO 11.1, PO 11.2, PO 11.3, PO 11.4, PO 11.5

Design in Urban Areas [All Development - Medium and High Rise [External Appearance]]
PO 12.1, PO 12.2, PO 12.3, PO 12.4, PO 12.5, PO 12.6, PO 12.7, PO 12.8

Design in Urban Areas [All Development - Medium and High Rise [Landscaping]]
PO 13.1, PO 13.2, PO 13.3, PO 13.4

Design in Urban Areas [All Development - Medium and High Rise [Environmental]]
PO 14.1, PO 14.2, PO 14.3

Design in Urban Areas [All Development - Medium and High Rise [Car Parking]]
PO 15.1, PO 15.2

Design in Urban Areas [All Development - Medium and High Rise [Overlooking/Visual Privacy]]
PO 16.1

Design in Urban Areas [All non-residential development [Water Sensitive Design]]
PO 42.1, PO 42.2, PO 42.3

Design in Urban Areas [All non-residential development [Wash-down and Waste Loading and Unloading]]
PO 43.1

Infrastructure and Renewable Energy Facilities [Wastewater Services]
PO 12.1, PO 12.2

Interface between Land Uses [Hours of Operation]
PO 2.1

Interface between Land Uses [Overshadowing]
PO 3.1, PO 3.2, PO 3.3

Interface between Land Uses [Activities Generating Noise or Vibration]
PO 4.1, PO 4.2, PO 4.5, PO 4.6

Interface between Land Uses [Air Quality]
PO 5.2

Interface between Land Uses [Light Spill]
PO 6.1

Interface between Land Uses [Solar Reflectivity / Glare]
PO 7.1

Out of Activity Centre Development
PO 1.1, PO 1.2

Site Contamination
PO 1.1

Transport, Access and Parking [Movement Systems]
PO 1.2, PO 1.4

Transport, Access and Parking [Sightlines]
PO 2.1, PO 2.2

Transport, Access and Parking [Vehicle Access]
PO 3.1, PO 3.2, PO 3.3, PO 3.4, PO 3.5, PO 3.6, PO 3.7, PO 3.8, PO 3.9

Transport, Access and Parking [Access for People with Disabilities]
PO 4.1

Transport, Access and Parking [Vehicle Parking Rates]
PO 5.1

Transport, Access and Parking [Vehicle Parking Areas]
PO 6.1, PO 6.2, PO 6.3, PO 6.4, PO 6.5, PO 6.6

Transport, Access and Parking [Undercroft and Below Ground Garaging and Parking of Vehicles]
PO 7.1

Transport, Access and Parking [Bicycle Parking in Designated Areas]
PO 9.1, PO 9.2, PO 9.3		St Andrews Hospital Precinct Subzone [Land Use and Intensity]
PO 1.1

St Andrews Hospital Precinct Subzone [Built Form and Character]
PO 2.1, PO 2.2, PO 2.3

St Andrews Hospital Precinct Subzone [Catalyst Sites]
PO 3.1, PO 3.2, PO 3.3, PO 3.4

St Andrews Hospital Precinct Subzone [Access]
PO 4.1, PO4.2

WCH and Memorial Hospital Precinct Subzone [Land Use and Intensity]
PO 1.1

WCH and Memorial Hospital Precinct Subzone [Built Form and Character]
PO 2.1, PO 2.2

Neighbourhood Subzone [Land Use and Intensity]
PO 1.1

Neighbourhood Subzone [Built Form and Character]
PO 2.1, PO 2.2, PO 2.3, PO 2.4

Neighbourhood Subzone [Landscaping]
PO 4.1		Airport Building Heights (Aircraft Landing Areas) Overlay [Built Form]
PO 1.1

Airport Building Heights (Regulated) Overlay [Built Form]
PO 1.1

Building Near Airfields Overlay
PO 1.1, PO 1.2, PO 1.3

Character Area Overlay [All Development]
PO 1.1

Character Area Overlay [Built Form]
PO 2.1, PO 2.2, PO 2.3, PO 2.4, PO 2.5

Character Area Overlay [Alterations and Additions]
PO 3.1

Character Area Overlay [Context and Streetscape Amenity]
PO 6.1, PO 6.2

Character Preservation District Overlay [Built Form and Character]
PO 2.1, PO 2.2, PO 2.3

Character Preservation District Overlay [Built Form and Character in the Rural Area]
PO 3.1, PO 3.2, PO 3.3, PO 3.4, PO 3.5, PO 3.6

Character Preservation District Overlay [Earthworks]
PO 4.1

Coastal Areas Overlay [Hazard Risk Minimisation]
PO 2.1, PO 2.2, PO 2.3, PO 2.4

Coastal Areas Overlay [Coast Protection Works]
PO 3.1, PO 3.2

Coastal Areas Overlay [Environment Protection]
PO 4.1, PO 4.2, PO 4.3, PO 4.4, PO 4.5, PO 4.6, PO 4.7

Coastal Areas Overlay [Access]
PO 5.1, PO 5.2, PO 5.4

Coastal Flooding Overlay
PO 1.1

Defence Aviation Area Overlay [Built Form]
PO 1.1, PO 1.2

Future Local Road Widening Overlay [Future Road Widening]
PO 1.1

Future Road Widening Overlay [Future Road Widening]
PO 1.1

Gas and Liquid Petroleum Pipelines Overlay [Land Use and Intensity]
PO 1.1

Gas and Liquid Petroleum Pipelines (Facilities) Overlay [Safety]
PO 1.1

Gateway Overlay [Built Form and Character]
PO 1.1, PO 1.2, PO 1.3

Gateway Overlay [Landscaping]
PO 3.1, PO 3.2, PO 3.3, PO 3.4

Hazards (Acid Sulfate Soils) Overlay [Land Use and Intensity]
PO 1.1

Hazards (Bushfire - General Risk) Overlay [Siting]
PO 1.1

Hazards (Bushfire - General Risk) Overlay [Built Form]
PO 2.1, PO 2.2

Hazards (Bushfire - General Risk) Overlay [Vehicle Access – Roads, Driveways and Fire Tracks]
PO 5.1, PO 5.2, PO 5.3

Hazards (Bushfire - High Risk) Overlay [Land Use]
PO 1.1

Hazards (Bushfire - High Risk) Overlay [Siting]
PO 2.1

Hazards (Bushfire - High Risk) Overlay [Built Form]
PO 3.1, PO 3.2

Hazards (Bushfire - High Risk) Overlay [Vehicle Access –Roads, Driveways and Fire Tracks]
PO 6.1, PO 6.2, PO 6.3

Hazards (Bushfire - Medium Risk) Overlay [Siting]
PO 1.1

Hazards (Bushfire - Medium Risk) Overlay [Built Form]
PO 2.1, PO 2.2

Hazards (Bushfire - Medium Risk) Overlay [Vehicle Access - Roads, Driveways and Fire Tracks]
PO 5.1, PO 5.2, PO 5.3

Hazards (Bushfire - Outback) Overlay [Vehicle Access - Roads and Driveways]
PO 2.1, PO 2.2

Hazards (Bushfire - Regional) Overlay [Siting]
PO 1.1

Hazards (Bushfire - Regional) Overlay [Built Form]
PO 2.1, PO 2.2

Hazards (Bushfire - Regional) Overlay [Vehicle Access -Roads and Driveways]
PO 5.1, PO 5.2, PO 5.3

Hazards (Flooding) Overlay [Flood Resilience]
PO 3.1, PO 3.2, PO 3.3, PO 3.4, PO 3.5

Hazards (Flooding) Overlay [Environmental Protection]
PO 4.1, PO 4.2

Hazards (Flooding) Overlay [Site Earthworks]
PO 5.1, PO 5.2

Hazards (Flooding) Overlay [Access]
PO 6.1, PO 6.2

Hazards (Flooding – General) Overlay [Flood Resilience]
PO 2.1

Hazards (Flooding - Evidence Required) Overlay [Flood Resilience]
PO 1.1

Heritage Adjacency Overlay [Built Form]
PO 1.1

Historic Area Overlay [All Development]
PO 1.1

Historic Area Overlay [Built Form]
PO 2.1, PO 2.2, PO 2.3, PO 2.4, PO 2.5

Historic Area Overlay [Context and Streetscape Amenity]
PO 6.1, PO 6.2

Historic Area Overlay [Ruins]
PO 8.1

Historic Shipwrecks Overlay [General]
PO 1.1

Key Outback and Rural Routes Overlay [Access - Safe Entry and Exit (Traffic Flow)]
PO 1.1

Key Outback and Rural Routes Overlay [Access - On-Site Queuing]
PO 2.1

Key Outback and Rural Routes Overlay [Access - Location (Spacing) - Existing Access Points]
PO 3.1

Key Outback and Rural Routes Overlay [Access - Location (Spacing) - New Access Points]
PO 4.1

Key Outback and Rural Routes Overlay [Access - Location (Sight Lines)]
PO 5.1

Key Outback and Rural Routes Overlay [Access - Mud and Debris]
PO 6.1

Key Outback and Rural Routes Overlay [Access - Stormwater]
PO 7.1

Key Outback and Rural Routes Overlay [Building on Road Reserve]
PO 8.1

Key Outback and Rural Routes Overlay [Public Road Junctions]
PO 9.1

Key Railway Crossings Overlay [Access, Design and Function]
PO 1.1

Local Heritage Place Overlay [Built Form]
PO 1.1, PO 1.2, PO 1.3, PO 1.4, PO 1.5, PO 1.6, PO 1.7

Local Heritage Place Overlay [Landscape Context and Streetscape Amenity]
PO 5.1

Local Heritage Place Overlay [Conservation Works]
PO 7.1

Major Urban Transport Routes Overlay [Access - Safe Entry and Exit (Traffic Flow)]
PO 1.1

Major Urban Transport Routes Overlay [Access - On-Site Queuing]
PO 2.1

Major Urban Transport Routes Overlay [Access – Location (Spacing) - Existing Access Points]
PO 3.1

Major Urban Transport Routes Overlay [Access – Location (Spacing) – New Access Points]
PO 4.1

Major Urban Transport Routes Overlay [Access - Location (Sight Lines)]
PO 5.1

Major Urban Transport Routes Overlay [Access - Mud and Debris]
PO 6.1

Major Urban Transport Routes Overlay [Access - Stormwater]
PO 7.1

Major Urban Transport Routes Overlay [Building on Road Reserve]
PO 8.1

Major Urban Transport Routes Overlay [Public Road Junctions]
PO 9.1

Major Urban Transport Routes Overlay [Corner Cut-Offs]
PO 10.1

Mount Lofty Ranges Water Supply Catchment (Area 1) Overlay [Water Quality]
PO 1.1

Mount Lofty Ranges Water Supply Catchment (Area 1) Overlay [Wastewater]
PO 2.1, PO 2.2, PO 2.3, PO 2.4

Mount Lofty Ranges Water Supply Catchment (Area 1) Overlay [Stormwater]
PO 3.1, PO 3.2, PO 3.3, PO 3.9

Mount Lofty Ranges Water Supply Catchment (Area 1) Overlay [Landscapes and Natural Features]
PO 4.1

Mount Lofty Ranges Water Supply Catchment (Area 2) Overlay [Water Quality]
PO 1.1

Mount Lofty Ranges Water Supply Catchment (Area 2) Overlay [Wastewater]
PO 2.1, PO 2.3, PO 2.4, PO 2.5

Mount Lofty Ranges Water Supply Catchment (Area 2) Overlay [Stormwater]
PO 3.1, PO 3.2, PO 3.3, PO 3.9

Mount Lofty Ranges Water Supply Catchment (Area 2) Overlay [Landscapes and Natural Features]
PO 4.1

Native Vegetation Overlay [Environmental Protection]
PO 1.1, PO 1.2, PO 1.4

Non-Stop Corridors Overlay [Non-Stop Corridor Overlay]
PO 1.1

Resource Extraction Protection Area Overlay [Protection of Strategic Resources]
PO 1.1

River Murray Flood Plain Protection Area Overlay [Wastewater]
PO 2.1

River Murray Flood Plain Protection Area Overlay [Built Form and Character]
PO 5.1, PO 5.3

River Murray Flood Plain Protection Area Overlay [Flood Resilience]
PO 6.1, PO 6.2

River Murray Flood Plain Protection Area Overlay [Environmental Protection]
PO 7.1, PO 7.2, PO 7.3

River Murray Flood Plain Protection Area Overlay [Access]
PO 8.1, PO 8.2, PO 8.3

Scenic Quality Overlay [Land Use and Intensity]
PO 1.1

Scenic Quality Overlay [Built Form and Character]
PO 2.1

Scenic Quality Overlay [Landscaping]
PO 3.1

Scenic Quality Overlay [Earthworks]
PO 4.1

Significant Interface Management Overlay [Land Use and Intensity]
PO 1.1

Significant Landscape Protection Overlay [Land Use and Intensity]
PO 1.1

Significant Landscape Protection Overlay [Built Form and Character]
PO 2.1, PO 2.2

Significant Landscape Protection Overlay [Landscaping]
PO 3.1

Significant Landscape Protection Overlay [Earthworks]
PO 4.1

State Heritage Area Overlay [Built Form]
PO 1.1, PO 1.2, PO 1.3, PO 1.4, PO 1.5

State Heritage Area Overlay [Landscape Context and Streetscape Amenity]
PO 5.1

State Heritage Area Overlay [Conservation Works]
PO 7.1

State Heritage Place Overlay [Built Form]
PO 1.1, PO 1.2, PO 1.3, PO 1.4, PO 1.5, PO 1.6, PO 1.7

State Heritage Place Overlay [Landscape Context and Streetscape Amenity]
PO 5.1

State Heritage Place Overlay [Conservation Works]
PO 7.1

State Significant Native Vegetation Areas Overlay [Environmental Protection]
PO 1.1

Traffic Generating Development Overlay [Traffic Generating Development]
PO 1.1, PO 1.2, PO 1.3

Urban Transport Routes Overlay [Access - Safe Entry and Exit (Traffic Flow)]
PO 1.1

Urban Transport Routes Overlay [Access - On-Site Queuing]
PO 2.1

Urban Transport Routes Overlay [Access - (Location Spacing) - Existing Access Point]
PO 3.1

Urban Transport Routes Overlay [Access – Location (Spacing) – New Access Points]
PO 4.1

Urban Transport Routes Overlay [Access - Location (Sight Lines)]
PO 5.1

Urban Transport Routes Overlay [Access – Mud and Debris]
PO 6.1

Urban Transport Routes Overlay [Access - Stormwater]
PO 7.1

Urban Transport Routes Overlay [Building on Road Reserve]
PO 8.1

Urban Transport Routes Overlay [Public Road Junctions]
PO 9.1

Urban Transport Routes Overlay [Corner Cut-Offs]
PO 10.1

Water Resources Overlay [Water Catchment]
PO 1.1, PO 1.2, PO 1.5, PO 1.6, PO 1.7, PO 1.8
Retaining wall \u00A0 NoneDesign [All development [Fences and Walls]]
PO 9.1, PO 9.2		 NoneCharacter Area Overlay [All Development]
PO 1.1

Character Area Overlay [Built Form]
PO 2.1, PO 2.5

Coastal Areas Overlay [Hazard Risk Minimisation]
PO 2.3, PO 2.4

Coastal Areas Overlay [Coast Protection Works]
PO 3.1, PO 3.2, PO 3.3

Coastal Areas Overlay [Environment Protection]
PO 4.2, PO 4.3, PO 4.7

Coastal Flooding Overlay
PO 1.1

Future Road Widening Overlay [Future Road Widening]
PO 1.1

Hazards (Acid Sulfate Soils) Overlay [Land Use and Intensity]
PO 1.1

Hazards (Flooding) Overlay [Site Earthworks]
PO 5.1, PO 5.2

Historic Area Overlay [All Development]
PO 1.1

Historic Area Overlay [Built Form]
PO 2.1, PO 2.5

Local Heritage Place Overlay [Built Form]
PO 1.1, PO 1.5

Marine Parks (Managed Use) Overlay [Land Use]
PO 1.1

Marine Parks (Restricted Use) Overlay [Land Use]
PO 1.1

Mount Lofty Ranges Water Supply Catchment (Area 1) Overlay [Stormwater]
PO 3.9

Mount Lofty Ranges Water Supply Catchment (Area 1) Overlay [Landscapes and Natural Features]
PO 4.1

Mount Lofty Ranges Water Supply Catchment (Area 2) Overlay [Stormwater]
PO 3.9

Mount Lofty Ranges Water Supply Catchment (Area 2) Overlay [Landscapes and Natural Features]
PO 4.1

Native Vegetation Overlay [Environmental Protection]
PO 1.1, PO 1.2, PO 1.4

Ramsar Wetlands Overlay [General]
PO 1.1, PO 1.2, PO 1.3, PO 1.4

Regulated and Significant Tree Overlay [Land Division]
PO 3.1

River Murray Flood Plain Protection Area Overlay [Built Form and Character]
PO 5.4

River Murray Tributaries Protection Area Overlay [Land Use]
PO 1.1

Scenic Quality Overlay [Land Use and Intensity]
PO 1.1

Scenic Quality Overlay [Built Form and Character]
PO 2.1

Significant Landscape Protection Overlay [Earthworks]
PO 4.1

State Heritage Area Overlay [Built Form]
PO 1.1, PO 1.5

State Heritage Place Overlay [Built Form]
PO 1.1, PO 1.5

State Significant Native Vegetation Areas Overlay [Environmental Protection]
PO 1.1

Urban Transport Routes Overlay [Public Road Junctions]
PO 9.1

Water Resources Overlay [Water Catchment]
PO 1.1, PO 1.5, PO 1.7, PO 1.8
Tree-damaging activity \u00A0 None None NoneLocal Heritage Place Overlay [Landscape Context and Streetscape Amenity]
PO 5.1

Regulated and Significant Tree Overlay [Tree Retention and Health]
PO 1.1, PO 1.2, PO 1.3, PO 1.4

Regulated and Significant Tree Overlay [Ground work affecting trees]
PO 2.1

Regulated and Significant Tree Overlay [Land Division]
PO 3.1

State Heritage Area Overlay [Landscape Context and Streetscape Amenity]
PO 5.1

State Heritage Place Overlay [Landscape Context and Streetscape Amenity]
PO 5.1
All other Code Assessed Development All All All Any relevant Overlay: All
\u00A0

Table 4 - Restricted Development Classification

\u00A0
The following table identifies Classes of Development that are classified as Restricted subject to any 'Exclusions'.

Class of DevelopmentExclusions
Shop \u00A0

Any of the following:

\n
    \n
  1. shop with a gross leasable floor area less than 1000m2
    2. \n
  2. shop that is a restaurant.
    3. \n
\n
\u00A0

Table 5 - Procedural Matters (PM) - Notification

The following table identifies, pursuant to section 107(6) of the\u00A0Planning, Development and Infrastructure Act 2016, classes of performance assessed development that are excluded from notification. The table also identifies any exemptions to the placement of notices when notification is required.

Interpretation

Notification tables exclude the classes of development listed in Column A from notification provided that they do not fall within a corresponding exclusion prescribed in Column B.\u00A0

Where a development or an element of a development falls within more than one class of development listed in Column A, it will be excluded from notification if it is excluded (in its entirety) under any of those classes of development. It need not be excluded under all applicable classes of development.

Where a development involves multiple performance assessed elements, all performance assessed elements will require notification (regardless of whether one or more elements are excluded in the applicable notification table) unless every performance assessed element of the application is excluded in the applicable notification table, in which case the application will not require notification.

A relevant authority may determine that a variation to 1 or more corresponding exclusions prescribed in Column B is minor in nature and does not require notification.

Class of Development

(Column A)

Exceptions

(Column B)
  1. Development which, in the opinion of the relevant authority, is of a minor nature only and will not unreasonably impact on the owners or occupiers of land in the locality of the site of the development.

None specified.
  1. Any development involving any of the following (or of any combination of any of the following):
    1. advertisement
    2. child care facility
    3. community facility
    4. educational facility
    5. protective tree netting structure
    6. recreation area.

Except development that exceeds the maximum building height specified in\u00A0Community Facilities Zone DTS/DPF 2.1 or\u00A0does not satisfy any of the following:

  1. Community Facilities Zone DTS/DPF 2.2
  2. Community Facilities Zone DTS/DPF 2.3.
  1. Any development involving any of the following (or of any combination of any of the following):
    1. air handling unit, air conditioning system or exhaust fan
    2. carport
    3. deck
    4. fence
    5. internal building works
    6. land division
    7. outbuilding
    8. pergola
    9. private bushfire shelter
    10. replacement building
    11. retaining wall
    12. shade sail
    13. solar photovoltaic panels (roof mounted)
    14. swimming pool or spa pool and associated swimming pool safety features
    15. temporary accommodation in an area affected by bushfire
    16. tree damaging activity
    17. verandah
    18. water tank.

None specified.
  1. Consulting room.

Except where the site of the development is adjacent land to a site (or land) used for residential purposes in a neighbourhood-type zone.
  1. Demolition.

Except any of the following:

  1. the demolition (or partial demolition) of a State or Local Heritage Place (other than an excluded building)
  2. the demolition (or partial demolition) of a building in a Historic Area Overlay (other than an excluded building).
  1. Office.

Except office that exceeds the maximum building height specified in\u00A0Community Facilities Zone DTS/DPF 2.1, or is on a Catalyst Site in the St Andrews Hospital Precinct Subzone and exceeds the maximum building height in Community Facilities Zone DTS/DPF 2.1 that applies to development not on a Catalyst Site, or does not\u00A0satisfy any of the following:

  1. Community Facilities Zone DTS/DPF 1.3
  2. Community Facilities Zone DTS/DPF 2.2
  3. Community Facilities Zone DTS/DPF 2.3.
  1. Railway line.

Except where located outside of a rail corridor or rail reserve.
  1. Shop.

Except shop that exceeds the maximum building height specified in\u00A0Community Facilities Zone DTS/DPF 2.1, \u00A0or is on a Catalyst Site in the St Andrews Hospital Precinct Subzone and exceeds the maximum building height in Community Facilities Zone DTS/DPF 2.1 that applies to development not on a Catalyst Site, or does not\u00A0satisfy any of the following:

  1. Community Facilities Zone DTS/DPF 1.2
  2. Community Facilities Zone DTS/DPF 2.2
  3. Community Facilities Zone DTS/DPF 2.3.
  1. Telecommunications facility.

Except telecommunications facility that:

  1. is within 50m of a neighbourhood-type zone
    or
  2. exceeds 30m in height
    or
  3. is on a site that is adjacent land to a\u00A0site (or land) used for residential purposes.

Placement of Notices - Exemptions for Performance Assessed Development

None specified.

Placement of Notices - Exemptions for Restricted Development

None specified.
\u00A0

St Andrews Hospital Precinct Subzone

\n
\u00A0

Assessment Provisions (AP)

\n
\u00A0
Desired Outcome (DO)
\u00A0
Desired Outcome
DO 1

Accommodating hospital, clinical and health training, and allied research and educational facilities, along with independent medical and allied health facilities, supported by a mix of compatible accommodation and retail activity.

\u00A0
Performance Outcomes (PO) and Deemed-to-Satisfy (DTS) Criteria / Designated Performance Feature (DPF)
\n
\u00A0
Performance OutcomeDeemed-to-Satisfy Criteria / Designated Performance Feature
Land Use and Intensity
PO 1.1

Development is associated with or ancillary to the provision of community or health care services.

DTS/DPF 1.1

Development comprises one or more of the following:

  1. Child care facility
  2. Consulting room
  3. Dwelling
  4. Educational facilities
  5. Hospital
  6. Office
  7. Shop
  8. Supported Accommodation
PO 1.2

Small-scale shops, cafés restaurants or kiosks, located at ground or lower building floor levels to increase street level activity facing the Park Lands and service the local community.

DTS/DPF 1.2

None are applicable.

PO 1.3

Residential development primarily as part of a mixed use building located on the upper floors.

DTS/DPF 1.3

None are applicable.

Built Form and Character
PO 2.1

Buildings designed to reduce the apparent bulk of large scale development to contribute to a more intimate and human-scaled environment.

DTS/DPF 2.1

None are applicable.

PO 2.2

Development is designed to manage the interface with residential uses in the City Living Zone:

  1. in relation to building proportions, massing, and overshadowing
  2. by avoiding land uses, or intensity of land uses, that unduly impact residential amenity.
DTS/DPF 2.2

None are applicable.

PO 2.3

Buildings adjacent to Gilles Street, Vincent Street and St John's Lane are designed to complement the streetscape character regarding scale, massing, siting, composition and form.

DTS/DPF 2.3

None are applicable.

Catalyst Sites
PO 3.1

Development on a catalyst site\u00A0is medium to high scale.

DTS/DPF 3.1

None are applicable.

PO 3.2

Catalyst sites should be developed to manage the interface with residential development regarding intensity of use, overshadowing, massing, building proportions and traffic to minimise impacts on residential amenity.

DTS/DPF 3.2

None are applicable.

PO 3.3

The scale of development on a catalyst site should respond to its context, particularly the nature of the adjacent land uses and the interface treatments required to address impacts on sensitive uses.

DTS/DPF 3.3

None are applicable.

PO 3.4

Where there is an apparent conflict between the catalyst site provisions and Subzone, provisions (including any quantitative criteria) the catalyst site provisions will take precedence.

DTS/DPF 3.4

None are applicable.

Access
PO 4.1

Vehicle access, or intensification of access, from South Terrace or Gilles Street where possible.

DTS/DPF 4.1

None are applicable.

PO4.2

Car parking located behind buildings wherever possible.

DTS/DPF 4.2

None are applicable.

Advertisements
PO5.1

Advertisements are restrained in design, and simple in use of colour to achieve a coherent and complementary appearance.

DTS/DPF 5.1

None are applicable.

\u00A0

WCH and Memorial Hospital Precinct Subzone

\n
\u00A0

Assessment Provisions (AP)

\n
\u00A0
Desired Outcome (DO)
\u00A0
Desired Outcome
DO 1

Provision of health care and associated facilities.

\u00A0
Performance Outcomes (PO) and Deemed-to-Satisfy (DTS) Criteria / Designated Performance Feature (DPF)
\n
\u00A0
Performance OutcomeDeemed-to-Satisfy Criteria / Designated Performance Feature
Land Use and Intensity
PO 1.1

Development is associated with or ancillary to the provision of health care or health related services.

DTS/DPF 1.1

Development comprises one or more of the following:

  1. Child care facility
  2. Community facility
  3. Consulting room
  4. Educational facility
  5. Health care facility
  6. Hospital
  7. Office associated with community service
  8. Shop associated with community services
Built Form and Character
PO 2.1

Development adjoining King William Road (north of Kermode Street) is of a scale and designed to complement the streetscape character along King William Road.

DTS/DPF 2.1

None are applicable.

PO 2.2

Development south of Kermode Street sited and designed to:

  1. retain the set back and sense of address and open character to the Park Lands
  2. provide a transition down to a low rise scale adjacent to Sir Edwin Smith Drive
  3. provide an activated building interface to Kermode Street
  4. ensure buildings are sited off of side and rear boundaries and avoid blank walls that will be visible from the surrounding locality
  5. provide a visually interesting streetscape with buildings having a high level of fenestration, detailing and orientation towards the street
  6. minimise visual impact of car parking, vehicle access and egresses by siting any new car parking away from the street frontages.
DTS/DPF 2.2

None are applicable.

Advertisements
PO 3.1

Advertisements are restrained and discreet in design.

DTS/DPF 3.1

None are applicable.

\u00A0

Neighbourhood Subzone

\n
\u00A0

Assessment Provisions (AP)

\n
\u00A0
Desired Outcome (DO)
\u00A0
Desired Outcome
DO 1

Community, educational and health care land uses and residential development at medium densities as an alternative land use.

\u00A0
Performance Outcomes (PO) and Deemed-to-Satisfy (DTS) Criteria / Designated Performance Feature (DPF)
\n
\u00A0
Performance OutcomeDeemed-to-Satisfy Criteria / Designated Performance Feature
Land Use and Intensity
PO 1.1

Development is associated with or ancillary to the provision of community, educational, recreational and / or health care services.

DTS/DPF 1.1

None are applicable.

PO 1.2

Residential land uses at medium densities that provide an alternative to community, educational and health care facilities in the zone.

DTS/DPF 1.2

Development comprises one or more of the following:

  1. dwelling
  2. residential flat building
Built Form and Character
PO 2.1

Buildings designed, sited and of a scale and appearance that complements the character and amenity of adjoining residential areas and buildings of heritage significance.

DTS/DPF 2.1

None are applicable.

PO 2.2

Residential development that incorporates a high standard of architectural and urban design and sustainability.

DTS/DPF 2.2

None are applicable.

PO 2.3

Residential development constructed adjacent to a residential allotment in a neighbourhood-type zone:

  1. is of a bulk, height and floor space and provides a site frontage that complements the character and amenity of the locality
  2. provides space around buildings to maintain and enhance the predominant character of the locality and provide opportunities for landscaping.
DTS/DPF 2.3

None are applicable.

PO 2.4

In areas where public or common open space would otherwise be deficient, residential development provides open space of a size and area sufficient to meet the recreational and lifestyle needs of residents.

DTS/DPF 2.4

None are applicable.

Building Height
PO 3.1

Residential buildings of up to 3 storeys in height sufficiently set back from an existing dwelling in the zone, subzone or an adjoining zone to avoid detrimental impact on those dwellings due to the height, scale or bulk of the development.

DTS/DPF 3.1

None are applicable.

Landscaping
PO 4.1

Development incorporates substantial landscaping of streetscapes and unbuilt spaces.

DTS/DPF 4.1

None are applicable.

\u00A0
","DocTree_text":"Community Facilities Zone","DocTree_Number":"2.10","Community_Area":"Current","AnswerID":0,"DocumentPoint":0,"DocLevel":2,"ShowInstructions":false,"HasLinkedZones":false,"LoLinkZone":"","HasLinkedActs":false,"LoLinkActs":"","HasLinkedDocs":false,"LoLinkDocs":"","error":false,"errorMessage":""}